[. . . ] -- Children aged 8 or above are only allowed to clean the appliance and perform the Calc-Clean procedure under supervision. -- Do not let the mains cord come into contact with the hot soleplate of the iron. -- The soleplate of the iron can become extremely hot and may cause burns if touched. -- When you have finished ironing, before you clean the appliance, before you fill or empty the water tank and also when you leave the iron even for a short while: set the steam control to the ‘no steam’ position, put the iron on its stand and remove the mains plug from the wall socket. [. . . ] English Using the appliance Note:The iron may give off some smoke when you use it for the first time. When you stop ironing for a while, you can put the iron on the stand or on its heel. 3 If you are steam ironing, put the iron back onto the stand to reheat when the iron stops producing steam. If you are ironing without steam, put the iron back onto the stand to reheat when the temperature light goes on. Note:When you stop ironing for a while, always put the iron on the stand to let it reheat. Note:When you use the shot-of-steam or turbo-steam function, the iron may cool down rather quickly. 12 English Ironing without steam 1 Set the steam control to position 0 (= no steam). 2 Set the required ironing temperature (see chapter ‘Preparing for use’, section ‘Selecting the temperature and steam setting’). 2 Set the required ironing temperature (see chapter ‘Preparing for use’, section ‘Selecting the temperature and steam setting’). As soon as the water in the water tank is hot enough for steam ironing, the temperature light goes out. 5 Set the appropriate steam setting (see chapter ‘Preparing for use’, section ‘Selecting the temperature and steam setting’). Note:The iron starts to produce steam as soon as it reaches the set temperature. Note: Steam ironing is only possible at higher ironing temperatures (temperature settings 2 to MAX). Features Spray function You can use the spray function to remove stubborn creases at any temperature. English 2 Press the spray button several times to moisten the article to be ironed. 13 Shot of steam A powerful shot of steam helps remove stubborn creases. Note:The shot-of-steam function can only be used at temperature settings between 3 and MAX. Vertical shot of steam -- You can also use the shot-of-steam function when you hold the iron in vertical position. This is useful for removing creases from hanging clothes, curtains etc. Note:The turbo-steam function can only be used at the MAX temperature setting. [. . . ] For at få fuldt udbytte af den support, Philips tilbyder, skal du registrere dit produkt på www. For at holde strygesålen glat og uden ridser skal du sørge for at undgå kontakt med metalgenstande. Du har anvendt dampskudsfunktionen for ofte inden for en meget kort periode. Avant l’utilisation Fixation du crochet du support 1 Déployez le crochet au bas du support et fixez-le, à l’aide de la vis de fixation, sur la planche à repasser ou sur une autre surface stable, par exemple une table. [. . . ]